Abstract
Cryomilled 5083 Al alloys blended with volume fractions of 15, 30, and 50 pct unmilled 5083 Al were produced by consolidation of a mixture of cryomilled 5083 Al and unmilled 5083 Al powders. A bimodal grain size was achieved in the as-extruded alloys in which nanostructured regions had a grain size of 200 nm and coarse-grained regions had a grain size of 1 µm. Compression loading in the longitudinal direction resulted in elastic-perfectly plastic deformation behavior. An enhanced tensile elongation associated with the occurrence of a Lüders band was observed in the bimodal alloys. As the volume fraction of coarse grains was increased, tensile ductility increased and strength decreased. Enhanced tensile ductility was attributed to the occurrence of crack bridging as well as delamination between nanostructured and coarse-grained regions during plastic deformation.
Similar content being viewed by others
References
C.C. Koch, D.G. Morris, K. Lu, and A. Inoue: MRS Bull., 1999, Feb., pp. 54–58.
X. Zhang, H. Wang, R.O. Scattergood, J. Narayan, C.C. Koch, A.V. Sergueeva, and A.K. Mukherjee: Appl. Phys. Lett., 2002, vol. 81, pp. 823–25.
A.A. Karimpoor, U. Erb, K.T. Aust, and G. Palumbo: Scripta Mater., 2003, vol. 49, pp. 651–56.
R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–8.
K.M. Youssef, R.O. Scattergood, K.L. Murty, and C.C. Koch: Appl. Phys. Lett., 2004, vol. 85, pp. 929–31.
Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.
G. He, J. Eckert, W. Loser, and L. Schultz: Nature Mater., 2002, vol. 2, pp. 33–37.
V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2335–43.
Z. Lee, R. Rodriguez, R.W. Hayes, E.J. Lavernia, and S.R. Nutt: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1473–81.
B.Q. Han, F.A. Mohamed, and E.J. Lavernia: J. Mater. Sci., 2003, vol. 38, pp. 3319–24.
B.Q. Han, Z. Lee, S.R. Nutt, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 603–13.
D. Witkin, Z. Lee, R. Rodriguez, S. Nutt, and E. Lavernia: Scripta Mater., 2003, vol. 49, pp. 297–302.
H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Elmsford, NY, 1982.
S.L. Semiatin, K.V. Jata, M.D. Uchic, P.B. Berbon, D.E. Matejezyk, and C.C. Bampton: Scripta Mater., 2001, vol. 44, pp. 395–400.
B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Mater. Sci. Eng., 2003, vol. A358, pp. 318–23.
B.S. Dehiya and J.R. Weertman: in Creep and Fracture of Engineering Materials and Structures, J.C. Earthman and F.A. Mohamed, eds., TMS, Warrendale, PA, 1997, pp. 129–37.
M. Jain and T. Christman: Acta Metall., 1994, vol. 42, pp. 1901–11.
J.E. Carsley, A. Fisher, W.W. Milligan, and E.C. Aifantis: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2261–71.
D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–3509.
O. Susegg, E. Hellum, A. Olsen, and M.J. Luton: Phil. Mag. A, 1993, vol. 68, pp. 367–80.
G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1986.
M. Verdier, Y. Brechet, and P. Guyot: Acta Mater., 1999, vol. 47, pp. 127–34.
D. Kuhlmann-Wilsdorf: Phil. Mag. A, 1999, vol. 79, pp. 955–1008.
F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia: Acta Mater., 2003, vol. 51, pp. 2777–91.
T.G. Nieh and J. Wadsworth: Scripta Metall. Mater., 1991, vol. 25, pp. 955–58.
Z. Lee, D.B. Witkin, E.J. Lavernia, and S.R. Nutt: MRS Proc., Materials Research Society, Pittsburgh, PA, 2003, vol. 740, pp. I1.7.1-I1.7.6.
F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451–58.
Y.W. Kim and L.R. Bidwell: Scripta Metall., 1982, vol. 16, pp. 799–802.
T. Mukai, K. Ishikawa, and K. Higashi: Mater. Sci. Eng., 1995, vol. A204, pp. 12–18.
H.R. Last and R.K. Garrett: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 737–45.
D.J. Lloyd: Met. Sci., 1980, May, pp. 193–98.
D.J. Lloyd: Metall. Trans. A, 1980, vol. 11A, pp. 1287–94.
L.S. Sigl, P.A. Mataga, B.J. Dalgleish, R.M. McMeeking, and A.G. Evans: Acta Metall., 1988, vol. 36, pp. 945–53.
P.A. Mataga: Acta Metall., 1989, vol. 37, pp. 3349–59.
M. Bannister, H. Shercliff, G. Bao, F. Zok, and M.F. Ashby: Acta Metall., 1992, vol. 40, pp. 1531–37.
M. Hoffman, B. Fiedler, T. Emmel, H. Prielipp, N. Claussen, D. Gross, and J. Rodel: Acta Metall., 1997, vol. 45, pp. 3609–23.
D.R. Lesuer, C.K. Syn, O.D. Sherby, J. Wadsworth, J.J. Lewandowski, and J.W.H. Hunt: Int. Mater. Rev., 1996, vol. 41, pp. 169–97.
A.B. Pandey, B.S. Majumdar, and D.B. Miracle: Acta Mater., 2001, vol. 49, pp. 405–17.
W. Soboyejo: Mechanical Properties of Engineered Materials, Marcel Dekker, Inc., New York, NY, 2003.
M.F. Ashby, F.J. Blunt, and M. Bannister: Acta Metall., 1989, vol. 37, pp. 1847–57.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Han, B.Q., Lavernia, E.J., Lee, Z. et al. Deformation behavior of bimodal nanostructured 5083 Al alloys. Metall Mater Trans A 36, 957–965 (2005). https://doi.org/10.1007/s11661-005-0289-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-005-0289-7